Service At 500hrs is to be sure to protect your motor by changing the carbon brushes. Note, the vacuum will not stop after 500 hours, but if it continues without service, it could burn out the motor if the carbon brushes aren’t changed When the light turns red, it means the carbon brushes need replacement But [...]
Our central vacuum systems can be plugged into a standard 110-120v electrical Outlet. They work on 15 amps non dedicated breaker. For by-pass units (Semi-Commercial), a dedicated breaker is mandatory.
The compatibility is with the inlet valves. If your inlet valves are 1.5'' inner diameter and have 2 low-voltage pins inside, the hose will fit and the on-off switch will work. But to be 100% sure, we invite you to send us a picture of the inside of your inlet valves and a picture of you [...]
The low-voltage hose works on 24 volt. For the on / off switch to work, you need to have 2 low-voltage pins (metal prongs) in your wall inlet valves.
No, this brush is designed for hard surfaces. Our CARPET DELUXE and DELUXE PLUS attachment kit is especially designed for carpets. Click on the link below to see our carpet kits Carpet Deluxe Deluxe plus
The Soft-Start/Stop Technology is achieved through the vacuum's electronic module.
Yes, the vacuums are compatible with certified 2’’ standard piping systems as per ASTM F2158. If the piping network is not a 2'' standard piping system, a pipe reducer may be required to adapt to different pipe sizes
Yes, our hoses are compatible with most inlet valves with a 2'' inner diameter and 2 low-voltage pins (metal prongs) inside. You can also purchase the super valve converter to convert your hose from power cord to direct connect for electrified inlet valves (Supervalve) by clicking on the link below. Super valve converter
Click this link to purchase a hose extension to add an extra 15 ft of length to your existing hose
The on-off switch to start and stop your vacuum is on the hose handle. NOTE: There is a 3-second delay for the unit to start and shuts down completely.
