Using your system with a disposable filtration bag will add protection to your motor and reduce the maintenance time. Since all the debris will be contained in the bag, the washable permanent filter will stay cleaner and will last longer. Using your system without a disposable filtration bag is not issue. You may have to [...]
You can start your vacuum system by turning the hose 90 degrees to the right, in your inlet. If your system starts, you may have a broken on / off switch, which can be replaced easily. Our attachement kits come with a 2 year warranty, simply contact us and we will gladly assit you. A proof [...]
Yes, the attachment kit compatibility is with the wall inlet valves and not with the vacuum system. Simply verify the outer dimensions of your pipes is 2'' (as per ASTM F2158) and make sure you have low-voltage wire connections.
To make sure, simply verify that your pipping system is a 2'' thin wall white PVC and that you have 2 low voltage wires connected to your vacuum. If this is the case, it will be 100% compatible. You might have to slightly modify your existing pipping network to match the intake and exhaust, but the [...]
Yes, you need to use the provided junction box with all slim lights.
Service At 500hrs is to be sure to protect your motor by changing the carbon brushes. Note, the vacuum will not stop after 500 hours, but if it continues without service, it could burn out the motor if the carbon brushes aren’t changed When the light turns red, it means the carbon brushes need replacement But [...]
Our central vacuum systems can be plugged into a standard 110-120v electrical Outlet. They work on 15 amps non dedicated breaker. For by-pass units (Semi-Commercial), a dedicated breaker is mandatory.
The compatibility is with the inlet valves. If your inlet valves are 1.5'' inner diameter and have 2 low-voltage pins inside, the hose will fit and the on-off switch will work. But to be 100% sure, we invite you to send us a picture of the inside of your inlet valves and a picture of you [...]
The low-voltage hose works on 24 volt. For the on / off switch to work, you need to have 2 low-voltage pins (metal prongs) in your wall inlet valves.
No, this brush is designed for hard surfaces. Our CARPET DELUXE and DELUXE PLUS attachment kit is especially designed for carpets. Click on the link below to see our carpet kits Carpet Deluxe Deluxe plus
